HOW TO USE

• Usage
  Use paint on properly prepared interior wall and ceiling surfaces including previously painted and primed plaster, brick, drywall, cement, wood, metal and wallpaper.
• Prep
  Thoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Remove gloss from shiny surfaces. Patch cracks and spot prime. Medallion® paint can be used to prime patched areas and bare surfaces before applying the finish coat. For best results on heavily stained areas, use a coat of Valspar® Medallion® Interior Latex Primer. For drastic color changes or deep, vivid colors, prime with Valspar® Medallion® Tintable Primer for optimal color accuracy and coverage.
• Application
  Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premiumquality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 30 minute - 60 minute
  Recoat: 2 hour - 4 hour
• Clean-up & Disposal
  Clean up with warm, soapy water.